Controller-less WLANs

Requirement:

How to check whether the clients supports 802.11 W (MFP) on instant ?

NARVAR-IAP335-VC-AP1# show ap debug  client-tab

MFP Status: C - 1 if the station is MFP capable; R - 1 if the station has negotiated MFP

Note: It's a per-SSID based configuration and can be enabled only through CLI. MFP support has been introduced from Instant version 4.3.

(config) # wlan ssid-profile Test
(SSID Profile "Test") # mfp-capable 
(SSID Profile "Test") # mfp-required

• If the mfp-required parameter is enabled, the SSID supports only the clients that exhibt the MFP functionality.
• If the mfp-capable parameter enabled, the SSID supports management frame protection (MFP) capable clients and non-MFP clients.

.

.

.