How to configure separate radius and accounting servers in IAP

Aruba Employee

Introduction :

 

Prior to 4.1.1 code there was option only to have authentication server which does both radius auth and accounting. Now we have option to add separate radius and accounting servers.

 

Feature Notes :

 

 

There are two accounting server modes
 
Use authentication servers.
Use separate servers.
 

 

Environment :

 

This article is applicable on Instant APs running 4.1.1 and above code

 

Network Topology :

 

Network with Instant Aps and Radius servers

 

Configuration Steps :

 

Configuration through GUI
rtaImage.jpg

rtaImage.jpg


rtaImage.jpg



CLI

wlan ssid-profile test

 

   auth-server radius-server-2

 

   accounting-server <accounting servername>

 

   accounting-server <accounting servername>

 

 

 

 

 

Answer:
 
There are two accounting server modes in IAP 4.1.1.0:
 
Use authentication servers.
Send accounting packets to the same servers used for authentication
Use separate servers.
Send accounting packets to separate accounting servers
 
Troubleshooting :
 
radius server is “radius-server-1”, accounting server is “radius-server-2”.

rtaImage.jpg
 
 
Related Links :
 

 

Version history
Revision #:
1 of 1
Last update:
‎11-10-2014 04:11 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.