Controller-less WLANs

How to form a IAP cluster with 3G/4G uplink or wireless uplink

Environment : Any IAP with USB port - IAP-3, IAP-108/109, IAP-115, IAP-155

Instant OS version - 3.0 and above

 

Network Topology: rtaImage.png

 

Primary USB uplink 3G/4G, connecting to USB port on the IAP which will act as a root AP. Eth1 of root IAP connecting to the switch. Slave IAPs will be connecting to the same switch using Eth0 port.

 

 

Answer :

 

  • Bring up the root IAP with 3G/4G/wireless uplink
  • This will be acting as a root IAP
  • Create a dhcp scope for the wired-downlink on the root AP in a new vlan
  • Create a wired profile and assign Vlan 2 to it
  • Assign the wired-profile to eth1 on the root AP
  • Connect the downlink switch to the Eth1 of the root AP
  • Connect the slave APs Eth0 port to the same switch root AP’s eth1 port is plugged into
  • All the APs would form a cluster with root IAP acting as Master

 

Version History
Revision #:
1 of 1
Last update:
‎07-05-2014 05:55 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.