Controller-less WLANs

How to prioritize lync traffic for wireless clients in Instant AP deployments?

by on ‎06-27-2014 01:21 PM

Environment : This article applies to Instant AP deployments.

 

As per International Telegraph Union Telecommunication (ITU-T) recommendation, there should be less than 150 millisecond (ms) one-way end-to-end delay for high-quality real-time traffic such as voice.

As a packet traverses the network from source to destination, congestion in the network can result in the packet getting dropped, delayed and/or corrupted, resulting in retries and lost packets. The packets may also arrive at the destination with varying delays (jitter) or out of sequence. All of these problems adversely affect the quality of real-time traffic like voice and video.

Therefore the below ACL rule applied to role of Lync clients, prioritizes the time sensitive voice, video and multimedia applications over the best-effort data traffic by providing greater bandwidth and less delay.



Follow below steps to modify the role inorder to prioritize lync traffic for wireless clients:

1. Login to Instant web interface.
2. Select the WLAN name and click "Edit"
3. Navigate to "Access" tab and select the role that is assigned to clients.
4. Click on "New"

 

 

rtaImage.jpg

 

5. Configure as shown below:

 

rtaImage (1).jpg

 

 

6. Click OK and then Finish.

Comments
MVP MVP
If they are using a cloud based Lync deployment, sips should be https
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.