Q:
IAP custom port for speed test
This IAP custom port is available from code 4.2.3
•Speed test using iperf for AP uplink bandwidth measurement is supported since 4.2.1.
•This release adds an ability to define custom port for speed test.
From CLI
Host# speed-test <serverip> <proto> server-port <port>
Config command
Host# configure t
We now support CLI commit model, please type "commit apply" for configuration to take effect.
Host (config) # speed-test
Host (speed-test) # server-port <port>
Test# show speed-test
Speed Test results :
Time of Execution :Sun, 28 May 2016 15:13:38 GMT
Server IP :10.13.6.6
Local IP :10.1.1.1
Local Port :64438
Remote Port :5300
MAC :9c:1c:12:xx:xx:xx
System Name :TAC-Test
Protocol :TCP
Duration :10
Upstream Bytes :15578640
Upstream Bandwitdh(bps) :12462400
upstream retries :770
Test#
You can see Remote Port added in the above show command output.
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.