Controller-less WLANs

 View Only
last person joined: one year ago 

Articles relating to existing and legacy HPE Aruba Networking products and solutions including IAP, Central / HPE Aruba Networking Central, MSR, and Outdoor Mesh

What is an Interfering AP and how do we see related logs on Aruba Central dashboard? 

Jun 18, 2014 05:07 PM

Environment   This article applies to all IAPs running 6.2.1.0-3.3.0.0 or higher version and managed by Aruba Central cloud based solution.

 

 

An interfering AP is an AP seen in the RF environment but is not connected to the wired network. While the interfering AP can potentially cause RF interference, it is not considered a direct security threat, because it is not connected to the wired network. However, an interfering AP may be reclassified as a rogue AP depending upon whether it is detected on the Wired network as well.

To check Interfering AP related logs, follow these steps:

  1. Navigate to Monitoring> WIDS.  On top you would find the total number of Interfering APs detected.


1.png



      2.Navigate further down the page, to view various logs related to Interfering APs and other threats under WIDS events. The Type field shows the AP classification as well as various types of attacks on the network.


2.png

Statistics
0 Favorited
3 Views
0 Files
0 Shares
0 Downloads

Related Entries and Links

No Related Resource entered.