What is the hardware configuration and software requirements of the IAP 108 and 109?

Aruba Employee

Environment  :  This article applies to ArubaOS 6.2.0.0 and Aruba Instant 3.2.0.0

 

MINIMUM SOFTWARE VERSIONS
• ArubaOS™ 6.2.0.0
• Aruba Instant 3.2.0.0

HARDWARE SPECIFICATIONS
RAP 108 (Two RP-SMA connectors for external dual-band antennas)
RAP 109 (Four integrated omni-directional antennas for 2x2 MIMO with maximum antenna gain of 5.0 dBi in both 2.4 GHz and 5 GHz. Built-in antennas are optimized for vertical orientation)

 

rtaImage.png

 

 

Chipset platform: Atheros Wasp AR9344 SOC + Peacock AR9582 for second radio SOC CPU: MIPS 74K @ 500MHz

Memory: 128MB SDRAM, 32MB FLASH

INTERFACES
• Network:
-- ENET0 (uplink): One 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
-- ENET1 (local): One 10/100BASE-T Ethernet (RJ-45), autosensing link speed and MDI/MDX
• One port for DC power connector
• One USB 2.0 port (Type A connector)
• One serial console interface (RJ-45)
• Visual indicators (LEDs):
-- Power/system status
-- Ethernet link status (2x)
-- Radio status (2x)
• Kensington security slot
• Reset button

 

rtaImage 1.png

 

Version history
Revision #:
1 of 1
Last update:
‎07-01-2014 01:28 PM
Updated by:
 
Labels (2)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: