Controllerless Networks

Reply
Occasional Contributor I
Posts: 9
Registered: ‎08-27-2013

3 iap 105 connected as a mesh

Hi All,

good day.

 

I have a question regarding 3 iap105 connecting as a mesh.
AP-1, AP-2 and AP-3.

Let say AP-2 connected to AP-1 as a mesh, can AP-3 connect to AP-2 as a mesh as well?

Let assume this is for factory deployment and only one ethernet cable are available(at AP-1)

 

Thanks:smileyhappy:

 

Moderator
Posts: 681
Registered: ‎04-16-2009

Re: 3 iap 105 connected as a mesh

Yes.  Each wired node (Portal) can support up to 8 mesh Points.   We also support multi-hop but only two hops.   Generally, however, Best-Practice would avoid multi-hop as well as wire each AP if possible as all APs in this Mesh environment share the same 5GHz channel.

Search Airheads
Showing results for 
Search instead for 
Did you mean: