Controllerless Networks

Reply
New Contributor

Adding a Wiring Closet on Airwave 8.0

Good Day

 

Just upgraded my Production Env to Airwave 8.0. Funny thing is I cannot seem to find where to add a Wiring Closet for my switches.

 

Thanks

Guru Elite

Re: Adding a Wiring Closet on Airwave 8.0

"Wiring Closet" is located under Drawing a Region.  Please search the online help in Airwave (under Documentation) to see how it is done.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Jef
Occasional Contributor II

Re: Adding a Wiring Closet on Airwave 8.0

Draw a region on the VisualRF en select the 'Wiring closet' region type for it.

Double click on it to enter the closet view.

Useful post? kudos appreciated!

Re: Adding a Wiring Closet on Airwave 8.0

Hey guys,

 

I just tried this myself and nowhere I see where you can choose a wiring closet, the documentation is not correct either.

I have tried on an already existing floorplan and adding a new one.

 

The options we have are below. Planning, Boundary and probability

Capture.JPG

Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Guru Elite

Re: Adding a Wiring Closet on Airwave 8.0

Adding a closet is only available for the non-html5 (flash) version of VisualRF.  You can toggle this by going to VRF -> Setup -> toggle ‘enable html5’ to no, save/apply.  After a few minutes, you should have the Old (flash) version of the site that would allow adding Closets.  You can toggle it back by turning on Enable HTML5 to see the new (non-flash) version of the site.

 

Sorry in advance for the confusion.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Guru Elite

Re: Adding a Wiring Closet on Airwave 8.0

A quicker way to switch is using https://youramp/vrf to access the HTML5 (new) version of the site and:

https://youramp/site_list to access the Flash (older) version of the site.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Re: Adding a Wiring Closet on Airwave 8.0

Thanks Colin. I assume this will be ported over to the HTML5 version at some point
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Guru Elite

Re: Adding a Wiring Closet on Airwave 8.0

Let me try to find out...


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Re: Adding a Wiring Closet on Airwave 8.0

Any luck?
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
New Contributor

Re: Adding a Wiring Closet on Airwave 8.0

I hope this is on the roadmap too.  

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: