06-14-2016 03:33 PM
Why does one of my IAP-204-RW's only run at 100mbs where another AP runs at 1000mbs using the same switch port?
Ethernet led flashing orange denoting 10/100 Mbps whereas other AP Ethernet led flashing green 1000mbps
06-14-2016 03:37 PM
Try swapping the cable between the AP and the switch..
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
06-14-2016 04:11 PM
Also, is the switch POE or are you using injectors, and if you are using an injector, what is the injector model? That should be swapped out/removed as well if you are testing line integrity between switchport and AP.
Sr. Techical Marketing Engineer
06-14-2016 04:21 PM
- the cable between the switch and the IAP
- the speed of the port (is it auto or manually configured to 100 mbps or 1 gbps).
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACDX
[If my post is helpful please give kudos, or mark as solved if it answers your post.]