Controllerless Networks

Reply
Aruba Employee
Posts: 20
Registered: ‎01-23-2012

Aruba instant 6.1.3.0-3.1.0 DHCP Server

[ Edited ]

Hi,

 

I would like to know if it is possible to configure the start IP Address and the end IP Address of a DHCP pool?

 

Configuration:

ip dhcp DHCPPOOLNAME
server-type Local
server-vlan 125
subnet 192.168.125.0
subnet-mask 255.255.255.0
lease-time 14400
dns-server 8.8.8.8,8.8.4.4
domain-name domain.com

 

resulting /etc/dnsmasq.conf:

#profile: DHCPPOOLNAME
{
vlan-id=125
dhcp-range=192.168.125.2,192.168.125.254,255.255.255.0,14400s
dhcp-option=1,255.255.255.0
dhcp-option=3,192.168.125.1
dhcp-option=6,8.8.8.8,8.8.4.4
dhcp-option=15,domain.com
}

Paul Gallant. Eng.
CWNA, CWSP
Aruba Employee
Posts: 5
Registered: ‎04-11-2007

Re: Aruba instant 6.1.3.0-3.1.0 DHCP Server

It is not possible to define a start and end IP address for a DHCP pool for a type "local".

 

However, if you are using a "Centralized L2" mode of DHCP pool, you can exclude a range of IPs using the exclude option. This mode of operation is intended to be used for a HQ-Branch office deployment with distributed DHCP and might not really address your problem.

Search Airheads
Showing results for 
Search instead for 
Did you mean: