Controllerless Networks

Reply
New Contributor
Posts: 1
Registered: ‎12-11-2012

Defining DHCP Scope

We have 2 x Instant AP 105's and i would like the Virtual Controller to give out DHCP addresses to clients, it is doing this at present and is giving addresses in 172.16.11.0 / 24, i would like to ammend this to use a different scope.  Can anyone advise where i do this please as i cannot find it in the GUI anywhere?

 

Apologies if i am missing something obvious here

 

Thanks

 

Ryan

MVP
Posts: 3,009
Registered: ‎10-25-2011

Re: Defining DHCP Scope

yes you can here is where you chagne itdhcp.png

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
MVP
Posts: 3,009
Registered: ‎10-25-2011

Re: Defining DHCP Scope

[ Edited ]

IF you dont find it there then you need to upgrade the firmware of the Instants...

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Search Airheads
Showing results for 
Search instead for 
Did you mean: