Controllerless Networks

Reply
Contributor II

Enable OKC with the Validate PMKID option

How do I enable OKC with the Validate PMKID option on a Instant cluster?

Re: Enable OKC with the Validate PMKID option

okc is an option when you select wpa2 enterprise
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]

Re: Enable OKC with the Validate PMKID option

okc is an option when you enabled wpa2 enterprise as the with method
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Aruba Employee

Re: Enable OKC with the Validate PMKID option

Hi,

 

It is possible with WPA2 only. please go through the following snapshot.

 

IAP OKC.JPG

Please feel free for any further help on this.

Valued Contributor II

Re: Enable OKC with the Validate PMKID option

Hi,

It is possible with WPA2 enterprose security only. for your ref:

 

IAP OKC.JPG

Please feel free for any further help on this.

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Contributor II

Re: Enable OKC with the Validate PMKID option

So when I do this it breaks authentication for apple devices, from what I have read it says to enable OKC with the validate PMKID option to allow apple devices to authenticate.  I see the box for OKC but I dont see anything for PMKID 

Guru Elite

Re: Enable OKC with the Validate PMKID option

Agarner, the "Vaidate PMKID" option is applied silently in instant when OKC is enabled.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: