Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

How to check configuration status for IAPs?

This thread has been viewed 0 times

  • 1.  How to check configuration status for IAPs?

    Posted Mar 22, 2015 09:36 PM

    Hello all,

     

    On several occasions I've encountered difficulties where I'll apply a configuration change but it doesn't take effect.  Rebooting the IAPs may resolve the issue and cause the configuration to be applied.  Or the reboot may cause the IAPs to revert to a previous configuration.  It's difficult to troubleshoot an issue when you're not sure of what the IAP is actually using for a configuration.

     

    Is there a command to determine the synchronization status of the configuration across all IAPs?  I'm running 6.4.2.3 (since the IAP-103s aren't support for GA - Current).

     

    Thanks.



  • 2.  RE: How to check configuration status for IAPs?
    Best Answer

    Posted Mar 22, 2015 10:38 PM

    With this command you can see the changes have not been applied (committed):

    IAP-1# show uncommitted-config

     

    And with this one you can see everything has been saved (committed) :

    IAP-1# show configuration 

     

    You can also take a look at the config ID :

    IAP-1# show aps

     



  • 3.  RE: How to check configuration status for IAPs?

    Posted Mar 23, 2015 03:34 AM

    Are you using Airwave or Aruba Central for management or are you using the local management on Instant?