Controllerless Networks

Reply
Frequent Contributor I
Posts: 61
Registered: ‎09-16-2014

IAP-105 Conversion Failed

Hi,

 

I tried to convert IAP-105 with 6.2 code to controller 7210 6.4 code but failed. I've updgraded that IAP to 6.4 but still lower than controller code also failed to convert. The error message is failed to retrieve image. FYI, we have local-master controller and the ap all point to local. Do i need to put the local ip address instead of master ip address during the conversion?Thanks

MVP
Posts: 724
Registered: ‎12-01-2010

Re: IAP-105 Conversion Failed

Which controller is your firmware distribution point?

Also, is it accessible from the iAP's subnet?

--Matthew

if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
Search Airheads
Showing results for 
Search instead for 
Did you mean: