Controllerless Networks

Reply
Frequent Contributor I
Posts: 271
Registered: ‎09-24-2010

IAP-105 Guest User DHCP Pool

Went from 6.1.3.1-3.0.0.2_34479 --> 6.1.3.4-3.1.0.0_35320 and the virtually assigned IP pool for guest users changed from 172.16.11.x to 192.168.10.x.. I need to upgrade to this version because it supports ETH0 bridging... however, I have a routable network internally on the 192.168.10.x network and all other controllers and virtual controllers on the network are already on the 172.16.11.x network.  Anyway to change the default IP pool that the virtual controller assigns?

MVP
Posts: 1,409
Registered: ‎05-28-2008

Re: IAP-105 Guest User DHCP Pool

Hi,

Good evening,

You might wanna try to re configure your DHCP settings in your VC:

Capture44.PNG

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Frequent Contributor I
Posts: 271
Registered: ‎09-24-2010

Re: IAP-105 Guest User DHCP Pool

i dont have that option.. I upgraded to the latest code and now I am getting this error.. on IE9 32bit

 

 

Moderator
Posts: 681
Registered: ‎04-16-2009

Re: IAP-105 Guest User DHCP Pool

Some people have reported this issue with that version of IE.  Try running IE in "Compatibility View / Mode"....that should take care of the IE error.

Frequent Contributor I
Posts: 271
Registered: ‎09-24-2010

Re: IAP-105 Guest User DHCP Pool

IP pool is now working as expected.. however, cant sign into VC with DNS name since the upgrade.  Only by IP address.  I tried compatability view/mode, no good.

MVP
Posts: 1,414
Registered: ‎11-30-2011

Re: IAP-105 Guest User DHCP Pool

different browser?

Search Airheads
Showing results for 
Search instead for 
Did you mean: