Controllerless Networks

Reply
New Contributor

IAP 105 continual reboot

Hello,
I have an AP 105 which is a continual reboot, how to stop it.

thank you for your help

Guru Elite

Re: IAP 105 continual reboot

Can you console in and post the output? 

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
New Contributor

Re: IAP 105 continual reboot

Hello Tim capalli

this is what I have in console, thank you to grant an interest in my publication

 

 

Restarting system.
.


APBoot 1.4.0.3 (build 37726)
Built: 2013-03-21 at 20:13:41

Model: AP-10x
CPU:   AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM:  128 MB
POST1: passed
Copy:  done
Flash: 16 MB
PCI:   scanning bus 0 ...
       dev fn venID devID class  rev    MBAR0    MBAR1    MBAR2    MBAR3
       00  00  168c  0029 00002   01 10000000 00000000 00000000 00000000
       01  00  168c  0029 00002   01 10010000 00000000 00000000 00000000
Net:   eth0
Radio: ar922x#0, ar922x#1

Hit <Enter> to stop autoboot:  0
Checking image @ 0xbf100000

Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.
ELF file is 32 bit
Loading .text @ 0x80e00000 (6161096 bytes)
Loading .data @ 0x813e02d0 (32 bytes)
Clearing .bss @ 0x813e02f0 (16 bytes)
## Starting application at 0x80e00000 ...
Uncompressing..........................................................
ú
Alcatel-Lucent
AOS-W Version 6.2.1.0-3.3.0.3 (build 39227 / label #39227)
Built by p4build@cartman on 2013-07-30 at 05:30:46 PDT (gcc version 4.3.3)
CPU Rev: aa
71x CPU
Flash variant: default
Cache parity protection disabled
Using 340.000 MHz high precision timer. cycles_per_jiffy=680000
Memory: 120704k/131072k available (1687k kernel code, 10268k reserved, 625k data, 5352k init, 0k highmem)
 available.
detected lzma initramfs
initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=26227712
LZMA initramfs by Ming-Ching Tiew <mctiew@yahoo.com> .................................................................................................................................................................................................................................................................................................................................................................................................................
AR7100 GPIOC major 0
wdt: registered with refresh
Enabling Watchdog
Talisker RSSI LED initialization
Creating 1 MTD partitions on "ar7100-nor0":
0x00000000-0x01000000 : "flash"
i2c /dev entries driver
i2c-talisker: using default base 0x18040000
AD7416 driver probing for devices on AR7100 I2C
.<6>lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver

Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT
Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT
Starting Kernel DES KAT ...Completed Kernel DES KAT
Starting Kernel AES KAT ...Completed Kernel AES KAT

Domain Name: alcatel-lucent.com
No panic info available
Testing TPM... Passed
ag7100_mod: module license 'unspecified' taints kernel.
AG7100: Length per segment 512
AG7100: Max segments per packet 4
AG7100: Max tx descriptor count    400
AG7100: Max rx descriptor count    252
AG7100: fifo cfg 3 018001ff
AG7100CHH: Mac address for unit 0
AG7100CHH: 9c:1c:12:c9:0c:4d
ATHRF1: Port 0, Neg Success
ATHRF1: unit 0 phy addr 0 ATHRF1: reg0 0
ag7100_ring_alloc Allocated 4800 at 0x80354000
ag7100_ring_alloc Allocated 3024 at 0x8038c000
AG7100: cfg1 0xf cfg2 0x7014
ATHRF1: Port 0, Neg Success
ATHRF1: unit 0 phy addr 0 ATHRF1: reg0 3100
AG7100: unit 0: phy not up carrier 1
Writing 4
ADDRCONF(NETDEV_UP): bond0: link is not ready
AG7100: unit 0 phy is up...RGMii 1000Mbps full duplex
AG7100: pll reg 0x18050010: 0x110000  AG7100: cfg_1: 0x1ff0000
AG7100: cfg_2: 0x3ff
AG7100: cfg_3: 0x18001ff
AG7100: cfg_4: 0xffff
AG7100: cfg_5: 0xfffef
AG7100: done cfg2 0x7215 ifctl 0x0 miictrl 0x22
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
wifi uplink not present...
Ethernet uplink active. Becoming Mesh Portal
AP xml model 39, num_radios 2 (jiffies 14180)
init_asap_mod: installation:0
radio 0: band 1 ant 0 max_ssid 8
radio 1: band 0 ant 0 max_ssid 8
election init: rand=b HZ=500
setting bond0 as bridge child
setting gre0 as split child
notify asap_mod 3g no present...
Starting watchdog process...
Adding bridge entry for magic vlan GW, ifindex 8195, 9c:1c:12:c9:0c:52
(00:00:28) !!! Init ---> Slave
Getting an IP address...
Dec 31 16:00:28 udhcpc[797]: udhcpc (v0.9.9-pre) started
Dec 31 16:00:28 udhcpc[797]: send_discover: pkt num 0, secs 0
Dec 31 16:00:28 udhcpc[797]: Sending discover...
Dec 31 16:00:30 udhcpc[797]: send_discover: pkt num 1, secs 2
Dec 31 16:00:30 udhcpc[797]: Sending discover...
Dec 31 16:00:32 udhcpc[797]: send_discover: pkt num 2, secs 4
Dec 31 16:00:32 udhcpc[797]: Sending discover...
Dec 31 16:00:34 udhcpc[797]: No lease, forking to background.

Dec 31 16:00:54 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:00:54 udhcpc[893]: Sending discover...
Dec 31 16:00:56 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:00:56 udhcpc[893]: Sending discover...
Dec 31 16:00:58 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:00:58 udhcpc[893]: Sending discover...
Launching IAP CLI...
Dec 31 16:01:20 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:01:20 udhcpc[893]: Sending discover...

Dec 31 16:01:22 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:01:22 udhcpc[893]: Sending discover...
Dec 31 16:01:24 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:01:24 udhcpc[893]: Sending discover...

Dec 31 16:01:47 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:01:47 udhcpc[893]: Sending discover...
Dec 31 16:01:48 udhcpc[893]: send_discover: pkt num 1, secs 1
Dec 31 16:01:48 udhcpc[893]: Sending discover...
Dec 31 16:01:50 udhcpc[893]: send_discover: pkt num 2, secs 3
Dec 31 16:01:50 udhcpc[893]: Sending discover...
Picked up default IP a9fe519e, rand 519e
Default IP is ready
Dec 31 16:02:12 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:02:12 udhcpc[893]: Sending discover...
Dec 31 16:02:14 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:02:14 udhcpc[893]: Sending discover...

Dec 31 16:02:16 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:02:16 udhcpc[893]: Sending discover...
Dec 31 16:02:38 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:02:38 udhcpc[893]: Sending discover...
Dec 31 16:02:40 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:02:40 udhcpc[893]: Sending discover...
Dec 31 16:02:42 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:02:42 udhcpc[893]: Sending discover...

Dec 31 16:03:04 udhcpc[893]: Sending discover...
Dec 31 16:03:06 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:03:06 udhcpc[893]: Sending discover...
Dec 31 16:03:08 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:03:08 udhcpc[893]: Sending discover...
Dec 31 16:03:30 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:03:30 udhcpc[893]: Sending discover...
Dec 31 16:03:32 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:03:32 udhcpc[893]: Sending discover...
Dec 31 16:03:34 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:03:34 udhcpc[893]: Sending discover...
Dec 31 16:03:56 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:03:56 udhcpc[893]: Sending discover...
Dec 31 16:03:58 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:03:58 udhcpc[893]: Sending discover...
Dec 31 16:04:00 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:04:00 udhcpc[893]: Sending discover...
Dec 31 16:04:22 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:04:22 udhcpc[893]: Sending discover...
Dec 31 16:04:24 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:04:24 udhcpc[893]: Sending discover...
Dec 31 16:04:26 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:04:26 udhcpc[893]: Sending discover...
Dec 31 16:04:48 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:04:48 udhcpc[893]: Sending discover...
Dec 31 16:04:50 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:04:50 udhcpc[893]: Sending discover...
Dec 31 16:04:52 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:04:52 udhcpc[893]: Sending discover...
Dec 31 16:05:14 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:05:14 udhcpc[893]: Sending discover...
Dec 31 16:05:17 udhcpc[893]: send_discover: pkt num 1, secs 3
Dec 31 16:05:17 udhcpc[893]: Sending discover...
Dec 31 16:05:18 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:05:18 udhcpc[893]: Sending discover...
Dec 31 16:05:40 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:05:40 udhcpc[893]: Sending discover...
Dec 31 16:05:42 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:05:42 udhcpc[893]: Sending discover...
Dec 31 16:05:44 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:05:44 udhcpc[893]: Sending discover...
Dec 31 16:06:06 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:06:06 udhcpc[893]: Sending discover...
Dec 31 16:06:08 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:06:08 udhcpc[893]: Sending discover...
Dec 31 16:06:10 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:06:10 udhcpc[893]: Sending discover...
Dec 31 16:06:32 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:06:32 udhcpc[893]: Sending discover...
Dec 31 16:06:34 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:06:34 udhcpc[893]: Sending discover...
Dec 31 16:06:36 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:06:36 udhcpc[893]: Sending discover...
Dec 31 16:06:58 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:06:58 udhcpc[893]: Sending discover...
Dec 31 16:07:00 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:07:00 udhcpc[893]: Sending discover...
Dec 31 16:07:02 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:07:02 udhcpc[893]: Sending discover...
Dec 31 16:07:24 udhcpc[893]: send_discover: pkt num 0, secs 0
Dec 31 16:07:24 udhcpc[893]: Sending discover...
Dec 31 16:07:26 udhcpc[893]: send_discover: pkt num 1, secs 2
Dec 31 16:07:26 udhcpc[893]: Sending discover...
Dec 31 16:07:28 udhcpc[893]: send_discover: pkt num 2, secs 4
Dec 31 16:07:28 udhcpc[893]: Sending discover...

Guru Elite

Re: IAP 105 continual reboot

The AP is not getting an IP address.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
New Contributor

Re: IAP 105 continual reboot

Thank's for your help Mr. Tim Capalli

New Contributor

Re: IAP 105 continual reboot

But, how do you fix that? I can not enter to the web interface, it does not propagate any ssid and the console, it makes that al the time.

Guru Elite

Re: IAP 105 continual reboot

You can fix it by supplying DHCP to the Instant AP.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: