Good day-
I have a (single, virtual controller) IAP-105 sitting inside a Cisco ASA. The 105 is directly connected to the ASA PoE port and the virtual controller pulls an IP address in the 10.8.1.X subnet from the DHCP server on the ASA. Intermittently, on a daily basis, wireless clients remain connected to the SSID but have no Internet connectivity through the ASA. The ASA shows that PoE port to the 105 is connected (shows status up/up) but I cannot PING to the IP of the virtual controller. The only two 'fixes' are to wait it out for a couple minutes and then everything recovers, or to do a shut/no shut on the PoE interface on the ASA, essentially rebooting the 105. I haven't seen any red flags in logging on the ASA nor in the 105. There are no issues on wired LAN users connected to the same ASA. I'm wondering if anyone else out there has suggestions, input, any pointers. Thanks in advance...
PS - seeing max about 34 clients connected to the IAP, of which MAYBE 5 are active connections, the rest are just employee BYOD that auto-connect within range but are not doing anything.