Hi,
I have a new IAP-205-RW (JL184A) setup in a residential environment. It is running firmware 6.4.2.3-4.1.1.4_49446, I have 3 seperate SSID's setup (personal, guest, other) which are tied to their respective VLANs. All 3 SSID's have the same settings aside from the name and the VLAN tag. I am using ARM with 2.4/5ghz and I have it set to prefer 5ghz with fair access, everything else is default settings. I have 7 wireless clients: 2x AC smartphones, 1x AN tablet, 1x GN ipod, 2x GN Chromecast, 1x G device.
I have noticed that after the unit boots up, I detect no 5ghz signal from Radio 2 (using wifi analyzer on android), if I select the AP in the VC and click on "Monitoring" it shows me:
Radio 1 : 2.4 GHz - Chan. 11
Radio 2 : 5 Ghz - Chan. 132E
The status LED on the unit are all lit up green on the unit even when the 5ghz doesn't appear to be working.
If I reboot the unit, the 5ghz signal will sometimes appear, once the 5ghz signal appears everything works great, until of course, the unit gets rebooted.
Any idea why the unit would boot up and not output a 5ghz signal?
Thanks,
Scott.