Controllerless Networks

Reply
MVP
Posts: 1,434
Registered: ‎10-25-2011

IAP-205-RW unable to establish VPN to 7220 6.4.2.6 or very flaky, other models no issue

[ Edited ]

here is an interesting one.

my IAP-205-RW (4.1.1.6 or 4.1.1.7) is unable to establish a VPN to an Aruba 7220 running 6.4.2.6

What is even more interesting is that this network has a total of 4 x 7220s (all masters) and it can only establish a VPN with 1 out of the 4. 

It has no issues establishing with a 7210 running 6.3.1.5. 

 

If I upgrade the controllers running 6.4.2.6 to 6.4.2.8 or 6.4.2.3, it still cannot establish a tunnel. 

I have also tested the following models

103, 115, 215 and 225s and they have 0 issues establishing a tunnel to the 4 master controllers. 

 

What makes it worse is that i have a cluster out in Seattle and it is terminating on one of the controllers that my IAP-205 at my desk cannot terminate to. 

I have opened a case with TAC and i am currently awaiting an answer.

 

I have ruled out firewalls, etc. from my desk all the other IAP models worked but my 205. 

Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Search Airheads
Showing results for 
Search instead for 
Did you mean: