aruba@qsd.wednet.edu wrote:
Here's another wierd thing. The 2.4 GHz now has 2 radios on the same channel (see attached)
Not wierd. Your AP had 1/6/11 before, but channel 6 might have more interference than putting the other AP on channel 11.
You should have broadcast filter ALL or ARP enabled for the best performance.
APs come up in channel 100 at first, so it is possible that because you have client aware checked, it did not change channels while clients are connected.
It is also entirely possible that your client is too close to the AP, so that itself could cause distortion and reduced performance. Make sure the client being tested is at least 3 meters away.
- Uncheck Client Aware
- Change Broadcast Filtering to ALL or ARP.
- Retest