I've been struggling slightly to make a decision on which AP model to go with, and was hoping to get a third opinion.
I'm currently looking at either one of the following three models:
IAP-103
IAP-115
IAP-215
My use cases are pretty simple. We will need about 7 access points to cover the whole office. I would expect 20-30 users per access point at peak utilization. Even during those peak times we would probably only have 1-2 out of the 7 APs actually reach that level of concurrent users. The bandwidth usage is fairly limited too, I don't expect it to exceed 20Mbit overall traffic (for all users on all APs combined).
My instinct is that I will probably be okay with the IAP-103. Would you agree with that? My thought was that with the lower cost of the IAP-103 I could probably buy 8 or 9 instead of 7 devices and install them more densely in the areas where I expect more utilization.
On the other hand the IAP-215 sounds like a bit too much. Our combined Internet bandwidth is only 30Mbit, so I don't think we would even need AC technology in any situation. Are there any other upsides?
I guess the only question is if the IAP-115 would be better suited for my needs.
Would it be possible to combine the IAP-115 with the IAP-103 and maybe use two 115s for the dense areas and 103s for the less dense areas?
Thanks in advance for your help!