Controllerless Networks

Reply
New Contributor
Posts: 1
Registered: ‎04-04-2012

IAP TLS authentication

Greetings,

Hate to be a total newbie but here it goes.  I am trying to setup a TLS authenticated SSID on IAP-135 running 6.1.3.4-3.1.0.0_35320.  Any help on this would be much appreciated.  I've read the documentation in the UG but not really getting a clear understanding of all the moving parts from that.

 

Regards,

MJT

 

Guru Elite
Posts: 21,259
Registered: ‎03-29-2007

Re: IAP TLS authentication

Not trying to oversimplify things, but the "authenticator", which would be the controller or IAP in this case, just forwards radius traffic to the radius server.  At most, you have to just configure WPA2-AES encrytion, the Network and the Radius Server.  All the rest of the configuration occurs on the Client and the Radius Server for TLS.

 

info on how to setup EAP-TLS can be found in the thread here:  http://community.arubanetworks.com/t5/Authentication-and-Access/EAP-TLS-configuration/m-p/37358/highlight/true#M729

 

Definitely NOT simple or straightforward.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: