Basically this scenario has 1 site without any “L3 capabilities”, meaning, there’s only 1 network.
So, the site already has a DHCP Server assigning IPs like 192.168.1.1 to .20 and the virtual controller would give IPs from .21 to 40 for instance.
The main requirement is, these clients should NOT be nated behing the Virtual Controller to allow them, for instance to do RDP into those clients.
The main reason is because in this site you must use a Proxy to go to the internet and, with this design, we could assume that .21 to 40 are given to wifi clients only and then open the web traffic on the firewall to that IP range.
I read from the documentation that Local L3 does NOT nat but in this scenario the VC acts as default gateway for the WIFI Client…
Do you guys have any suggestion for this scenario?
Thanks