01-26-2015 05:36 PM
On the controllers, you can discover Airgroup devices like Apple TVs and Airprint printers which are on the wired network as long as that VLAN is trunked to the controller and the controller has an IP in that VLAN.
Is it possible to do the same with IAP? Or do the Airgroup devices need to be connected via Wi-Fi? I can't seem to find any documentation or forum posts that support one way or the other.
Solved! Go to Solution.
01-26-2015 05:49 PM
If so, then how does that get set up on the IAP side? Obviously we trunk the VLAN to the IAPs, but do we need to assign an IP in the VLAN somewhere? What if that VLAN isn't even used for any wireless devices? Anything else that needs to be done to enable this?
01-31-2015 07:06 PM - edited 01-31-2015 07:07 PM
I have an Instant cluster and want to give it access to Apple TVs on a different wired VLAN so they will be discovered by airgroup.
VLAN 40 - AP mgmt
VLAN 25 - AV1 (ATVs)
VLAN 26 - AV2 (ATVs)
VLAN 440-442 - WLANs
The AV VLANs are trunked to the IAPs. That is, they are not filtered on the switch end:
#show running-config interface port-channel 1
switchport mode trunk
switchport trunk native vlan 40
The settings on the IAP are:
The IAPs only see servers in the local WLANs:
syd21ap01# show airgroup servers
MAC IP Type Host Name Service VLAN Wired/Wireless Role Group Name AP-Name
--- -- ---- --------- ------- ---- -------------- ---- ----- ---- -------
6a:88:14:45:69:18 172.26.41.37 DLNA allowall 441 wireless 18:64:72:cb:0e:d6
01:50:56:95:00:2b 172.16.7.197 DLNA allowall 1 wired syd2101
91:fd:61:66:34:08 172.26.40.32 mDNS KAs-iPhone allowall 440 wireless 18:64:72:cb:0f:a8
55:aa:c5:ee:6d:2b 172.26.41.10 DLNA allowall 441 wireless 18:64:72:cb:0f:6c
What extra config do I need on the IAP to get it to start listening to advertisements on VLANs 25 and 26?
03-25-2015 08:59 PM - edited 03-25-2015 09:00 PM
I finally got around to testing this today. I verified Tim C.'s statement that all you need to do is trunk the desired VLANs to the IAPs and they will take care of the mDNS for you. It will even pick it up from both the wired and the wireless side. FYI, I was running InstantOS 18.104.22.168.
Don't forget that DLNA isn't supported on InstantOS until version 4.1.x.x.