Hi,
I recently ran into an issue with a new IAP 225 cluster (ArubaOS (MODEL: 225), Version 6.3.1.1-4.0.0.1 (41049)).
Before i could get to configuring it, somone must have logged in and done something. The IAP's seem to be unable to keep their IP, it gets an IP during boot, but when its "up" it does not broadcast any SSID, it decides to show an IPv6 address when viewed on the switch via LLDP, or a default ip, ex 169.x.x.x.
After that cycle I am unable to contact the AP via webinterface again.
If i add a new IAP to the same subnet, the AP comes up and gets another master and then reboots and goes into same cycle.
I tried shutting down all IAP and setting up a configured IAP, but when i enable power they never join the new cluster.
I tried regaining control by adding DHCP option 43 to get it redirected to Airwave, but it does not show up.
AP's are already mounted in ceilings etc. so I am unable to gain console access easily and would love to get some suggestions that would not require me to go fetch a ladder and manually reset a bunch of AP's :)
So, how do one regain control of a cluster you can't get on the webinterface, nor easily manually reset them? :)
Regards
Kevin
#AP225