Controllerless Networks

Reply
Frequent Contributor I

IAP to Controler GRE Tunnel

Hello, is there a Document available with the necessary configuration Steps for both Sites to build a GRE Tunnel between the Controller and the IAP?

 

Thank you and best Regards

Re: IAP to Controler GRE Tunnel

The suetup is outlined in the guide.  http://support.arubanetworks.com/DOCUMENTATION/tabid/77/DMXModule/512/Default.aspx?EntryId=8868

 

One thing to note is that the APs and Controller must NOT be on the same subnet.


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACCX #817, ACMP, ACMX #294
Frequent Contributor I

Re: IAP to Controler GRE Tunnel

Hello, yes on the IAP Docs it is written what to Configure on IAP Site. What is necessary to configure on Controller?

 

Thank you and best Regards

Re: IAP to Controler GRE Tunnel

got it.  you just need to create the tunnel on the controller and point to the IAP that is hosting the VC.  It won't work if it points to the VC address, or at least it didn't when I tried.

 

On the controller,

 

interface tunnel 1

description "IAP tunnel"

tunnel source <controller ip>

tunnel destination <IAP ip>

tunnel vlan <x>

trusted

 


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACCX #817, ACMP, ACMX #294
New Contributor

Re: IAP to Controler GRE Tunnel

the above link no longer works, can you please provide a working link?

 

Aruba

Re: IAP to Controler GRE Tunnel

That link is valid even without a login to the support site, but try navigating to http://support.arubanetworks.com/HOME/tabid/37/Default.aspx select 'Documentation' then 'Software User and Reference Guides' select 'Aruba Instant' and pull the guide down for the current 3.4 release of IAP code.



| Adam Kennedy, Systems Engineer - adamk@hpe.com

| Service Providers – Aruba, an HPE Company

| Twitter: @adam8021x | Airheads: akennedy
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: