04-02-2014 01:54 PM - edited 04-02-2014 02:01 PM
I have an IAP225 that is connected to a Cisco 4506E switch. The IAP225 is power by POE 802.3at (30watts). What i am seeing is slow connectivity during my speed test (we have a 100Meg metro circuit to the internet). I am wondering where in the IAP225 i can find the radio status to make sure i am not being throttle to 1×3:1SS mode, eventhough i'm am providing it with 30Watts of POE.
When i connect to my Motorola AP7131, i can get about 60Mbps down and 55Mbps up. With the IAP225 it seem to be throttle to 10Mbps down and 10Mbps up.
The IAP225 and the Motorola AP7131 is setup and connect the same way. AP -->Switch-->Router--100Mbps Circuit (Internet).
Solved! Go to Solution.
04-02-2014 02:52 PM - edited 04-02-2014 02:53 PM