Log in to ask questions, share your expertise, or stay connected to content. Don’t have a login? Join now.
Hello,
We have an estate of some 8000 IAP 93's and are currently in the test/pilot phase for version 4.1.1.2. We have observed that after upgrading the 30 pilot sites every one is now posting this alert.
Device Resources: Percent CPU Utilization >= 85% for 10 minutes
Has anyone experienced this ? . We are aware we can delete this alert from AMP but are cautious about proceeding with the rollout with what could be a potential code problem.
Regards
Mike
Hello and thanks for the reply.
Previously testing version 4.1.1.0 without this issue, typically the IAP's generating this alert have <10 users and we don't use CP on any of our SSID's.
Sadly 4.1.1.1 has a critical security flaw only fixed in 4.1.1.2
DHCP is offloadedto the CE router and we see the alarms in both VC and slave IAP's
Typically each cluster has 4 SSID's
Good morning,
All four SSID's are active "production" networks so removing one of them is not an option and these devices have working with 4 SSID's for over 3 years now without this issue occuring.We have not enable either broadcast or multicast filtering but will sanity check this later.
Aruba support have advised several issues with release 4.1.1.2 and suggest using release 4.1.1.1 until these issues are fixed.
PS Tnx the Aruba support for getting back to me within the hour, good stuff!
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.