Hi everyone. Hope all is well with you. I was wondering what would be the optimal RF configuration for two IAP-335 deployed in a 4,300 sqft brick apartment. They are connected to a Humax modem through a TP-Link 8p POE+ switch. The modem is connected to the ISP providing 250mb down / 20mb up. Below, it's the current config. Thank you in advance.
Airtime Fairness Mode: preferred Access
ClientMatch Calculating Interval: 3 seconds
ClientMatch Neighbor Matching: 60 %
ClientMatch Threshold: 5
Spectrum Load Balancing Mode: Channel + Radio
Min Transmit Power: 18
Max Transmit Power: Max
Client Aware: On
Scanning: On
Legacy Only: Off
802.11d / 802.11h: On
Beacon Interval: 100 ms
Interference Immunity Level: 2
Channel Switch Announcement Count: 0
Background Spectrum Monitoring: Off
Customize ARM Power Range: Off
Very High Throughput: On