Hi!
We´re running a setup where the customer needs to be able to perform PXE boots on the wired interfaces of a RAP155 over IAP-VPN using a centralized L3 scope.
When we plug in a windows PC to the port, we get an IP-address. When we try to do a PXE boot the client never gets an IP-address. We can see the DHCP offer come back to the IAP in both cases but in the later the IAP never forwards it out to the wired interface.
Is anyone running PXE boot over IAP VPN centralized L3 successfully?
We´re using InstantOS 4.2.1.0.
Cheers,