12-09-2013 04:22 AM
After upgrading the firmware from '184.108.40.206-220.127.116.11_39461' to '18.104.22.168-22.214.171.124_40346', x3 access points out of x9 have disappeared of the VC, on Airwave the status of the AP's shows as "down" and "AP is not associated to Virtual Controller".
Would anyone be able to advise why this would happen?
Any Advice much appreciated.
12-09-2013 04:35 AM
If you actually look at the real VC on the instant, are they down in there too?
And then, if you try to contact/browse to the missing instant AP GUIs, do they respond or not?
12-09-2013 04:48 AM
When i SSH into the VC IP and do a show run i can see the AP's listed as per below but they not show up on the VC GUI?
I can also ping one of the missing AP's.
12-09-2013 04:53 AM
I'm not in my lab at the moment, so I can't check what the commands are, but it might be worth looking in the VC log?
If there's nothing in the log that suggests a root cause, and you want a quick/dirty fix, perhaps try CLI/GUI to a down member IAP and reboot it. It might well come back?
12-09-2013 12:23 PM
maybe enable trace debugging and see if you can see anything in the logs...
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
12-09-2013 02:33 PM