Hello,
I have a little issue with a RAP3 (used as an IAP) and 3G uplink. Here is the situation :
- Configuration is ok for 3G uplink
- 3G is working
- IAP version is 6.2.1.0-3.4.0.1_39461
But the only way to make 3G uplink up is to boot the RAP3 with eth0 connected to the network. In this case, 3G uplink is ok. If I boot the RAP3 only with the 3G key, the uplink never goes up.
Any idea about this ?
Thanks
Dimitri