01-27-2013 04:50 AM
I am setting up an Instant 105 for personal use. I am currently getting DHCP from a Netgear Router. How do I configure the Instant to be the DHCP Server? What options/issues will I have and will it manage my Wired clients as well? The 105 is connected to a POE switch as well as the other desktops.
01-27-2013 06:29 AM - edited 01-27-2013 06:55 AM
Your setup may not require it, but for others who may read this: you can setup additional scopes if necessary for other VLANs on the VPN tab under Settings (not the VPN link from the main page). The use guide discusses the details of these settings, including the various types.
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX
03-19-2013 07:11 PM
The VPN based example given has conflicting instructions. The image provided IS under the VPN link. I can't find a VLANs tab under settings or advanced settings, only under the VPN link. Also, based on the UG, it appears that only the local option would possibly work (if at all) since the others are described as only supporting VPN links to controllers that are not being used in most cases with an IAP that's not being converted. Please clarify.
04-29-2013 09:22 PM
Hi Just set up a dhcp scope for my guest vlan . Found the instructions a little missleading click on the vpn link and then DHCP server.
dose not look to be many dchp options however.