Controllerless Networks

Reply
Frequent Contributor I
Posts: 83
Registered: ‎05-11-2011

Zero Touch Deployment with a Controller in Japan Regulatory Domain

Hello everyone

Can I have a controller with the Japanese Regulatory Domain to terminate RAP AP from China, Singapore or India?

I use Zero touch to provision the remote RAP but so far I'm not able to deploy AP outside Japan.  I have AP groups per country with their correspond regulatory domains but this configuration creates a warning message because of the different regulatory domain ap profiles.

Also, is there any caveat using Activate for this setup?

 

Thanks,

 

Aruba Employee
Posts: 159
Registered: ‎02-14-2013

Re: Zero Touch Deployment with a Controller in Japan Regulatory Domain

Hi, 

 

I don't thing Activate has anything to do with it. 

 

You should be able to terminate RAPs from other countries if the hardware is country unrestricted and regulatory domain has the proper country code. Check "# show country" to verify if it is unrestricted. 

 

Thanks, 

Rajaguru Vincent 

Thanks,
Rajaguru Vincent
CWNA | CWSP | CWAP | CWDP | ACMP
Frequent Contributor I
Posts: 83
Registered: ‎05-11-2011

Re: Zero Touch Deployment with a Controller in Japan Regulatory Domain

Thanks Rahaguru

My hardware is restricted JP3, is there any way to upgrade/modified/buy a license to modified this mode?

 

 

Aruba Employee
Posts: 159
Registered: ‎02-14-2013

Re: Zero Touch Deployment with a Controller in Japan Regulatory Domain

[ Edited ]

Hi Antonio, 

 

Unfortunately, that is not possible since it is a hardware limitation. I would recommend that you get in touch your sales engineer for any suggestions. 

 

Thanks, 

Rajaguru Vincent 

Thanks,
Rajaguru Vincent
CWNA | CWSP | CWAP | CWDP | ACMP
Frequent Contributor I
Posts: 83
Registered: ‎05-11-2011

Re: Zero Touch Deployment with a Controller in Japan Regulatory Domain

I guess I have an  option to ship RAP units with the same regulatory domain of my controller to the destinations. In this case, I can create a AP.group with only wired access. If I take this approach, is this setup complaince with any local regulation?

Guru Elite
Posts: 21,280
Registered: ‎03-29-2007

Re: Zero Touch Deployment with a Controller in Japan Regulatory Domain

- You need a ROW (Rest of the World) controller.  It can then be set to any country besides the US or Israel to support what you are trying to achieve.

- When a RAP terminates on a controller it is set to the regulatory domain defined in the regulatory domain profile in the ap-group (in this case Japan).

 

With those setps, you should be in regulatory compliance, but you should double check everything with your local team just in case there is something has changed or that you do not know about.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor I
Posts: 83
Registered: ‎05-11-2011

Re: Zero Touch Deployment with a Controller in Japan Regulatory Domain

Thank you for the emplanations. I have two controllers in the way to my Data Center to cover all the region

Search Airheads
Showing results for 
Search instead for 
Did you mean: