Controllerless Networks

Reply
Super Contributor II

access rules - role-based

I am trying to setup a new WLAN on an instant by it wont allow me to set the Role-based option to a role of my choice. Each time I go back onto the access page it has reverted back to unrestricted.

The setup is -

1. primary usage -Employee

2. VLAN - custom

3. Security - Enterprise

4. Acces - needs to be role-based

 

Any ideas why it is not letting me set this?

version is - 6.4.0.2-4.1.0.0_44004 on a 135

Valued Contributor II

Re: access rules - role-based

HI,

 

It happens if you do not have any rule created for role assignment. create a rule as shown bellow.

 

IAProle.JPG

 

Please feel free for any further help on this.

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
New Contributor

Re: access rules - role-based

Kind of frustrating because we had these rules setup in Clearpass. Now we have to have them in both places? Kind of redundant, no?

 

Guru Elite

Re: access rules - role-based

If you're using ClearPass, simply return a value with Aruba-User-Role.


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
New Contributor

Re: access rules - role-based

After much scrolling I found that I can do a return value for Aruba CPPM Role which made more sense to me than the Aruba user role. Am I correct in that thinking? It seems to be moving traffic along into the correct vlans now. 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: