Controllerless Networks

Reply
Occasional Contributor II

iAP 225s Power Amber after Firmware Upgrade

Hello,

I upgraded the firmware on one of my vLans today to 6.5.4.7_64552, and now the power LED on all 6 APs on that vLan are solid amber. Before the firmware upgrade, all were solid green.

I understand this to mean they APs are now in powersave mode.

 

Is there anythign I can check via ssh or through the virtual controller that might help get it back to its normal status? 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: