Controllerless Networks

Reply
Frequent Contributor I

trying to configure an instant ap%2C with the native vlan of 851 on the uplink and use vlan 851

I have an instant AP that I would like to use vlan 851 for the ssid and have it be on the native vlan of the uplink from the AP.  I have not been able to get a client to connect to the ssid that is set up on vlan 851.   I can web into the AP (VC) and I have another SSID that has clients associated (vlan 863)   the ap and the VC have an ip address in the vlan 851.  any suggestions on how to get clients to work on vlan 851?  thanks.

Re: trying to configure an instant ap%2C with the native vlan of 851 on the uplink and use vlan 851

For VLAN assignment, choose "default".  That will place clients into the native VLAN on the switchport.

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: