Mobility Engineer Checklist

Deny Time Range

by Sergio ‎02-27-2017 03:46 AM

We would like the behavior of the controllers to be like the IAPs with Deny Time Range, configure the controller be in such a way that the SSID does not appear, as it happens in the IAP:

 

When we activate the "Deny Time Range" into the IAP, the SSID is disabled, it disappears.

When we activate it on the controllers, the SSID remains, continues to be visible but it disconnects users that are connected to it and does not allow connect them.

Comments
mrzero
This is so by design on the controller. It denies clients during deny time range