Monitoring, Management & Location Tracking

Cisco IOS "write mem" feature

AMP 5.2 adds an optional "use write mem" feature for IOS APs. By default, the control to enable it will not show up in the AMP GUI. 

To make the option show up in the UI, set seas_config.allow_write_mem to 1 like this:

# echo "update seas_config set allow_write_mem = 1;" | db

If the user then enables it (it's a per-template setting), AMP copies the (merged) running-config back to the startup-config (prior to rebooting, if we're also rebooting).

Version history
Revision #:
1 of 1
Last update:
‎06-09-2014 09:36 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.