Monitoring, Management & Location Tracking

How do I add APs into AMP?

There are several ways to add APs into AMP:

- Use the 3 auto discovery protocols available on the AMP Setup page. There's some good documentation on this in the User Guide.

- Add one AP at a time on the Device Setup -> Add page.

- Do networks scans with SNMP and HHTP to discover the APs. This is also well-documented in the User Guide.


- Import APs via a .csv file. - Import APs via a .csv file. The wizard for importing from a .csv file is on the Device Setup -> Add page.

Version history
Revision #:
1 of 1
Last update:
‎06-09-2014 03:43 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.