Network Management

Reply
Occasional Contributor II
Posts: 19
Registered: ‎04-24-2016

AirWave 8.2.0.2 not finding new IAP 205

Hello,

AirWave 8.2.0.2 not finding new IAP 205. Everywhere I can see, auto Join is enabled. On the same L2 network where this is the 2nd IAP.

 

New IAP 2.4Ghz & 5Ghz lights are yellow.

 

 

Any ideas?

Thx,

D

MVP
Posts: 418
Registered: ‎11-04-2011

Re: AirWave 8.2.0.2 not finding new IAP 205

Is the existing Instant AP the same model (205)?? If not, make sure that the new IAP205 is on the same firmware level as your existing cluster before joining.

 

As long as the new AP is not joined in your existing cluster, it will not show up on Airwave, so fix the cluster joint of the 205 first.

 

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC.
Occasional Contributor II
Posts: 19
Registered: ‎04-24-2016

Re: AirWave 8.2.0.2 not finding new IAP 205

I'm sure the new IAP 205 is on a differnet firmware level since I've upgraded the first one. As the instant SSID is not showing I'll have to setup a stand alone L2 network so I can upgrade the firmware.

Stnadby for hte results.

 

Thx,

 

D

 

Occasional Contributor II
Posts: 19
Registered: ‎04-24-2016

Re: AirWave 8.2.0.2 not finding new IAP 205

Looks like the firmware on the IAP was updated automatically and then was discovered by Airwave after a day or so.

Search Airheads
Showing results for 
Search instead for 
Did you mean: