Network Management

Reply
Frequent Contributor I
Posts: 77
Registered: ‎12-07-2015

AirWave Template mismatch in Aruba Instant VC for cp-logo-checksum

Hi All,

 

I have a template mismatch that I can't seem to get rid of. It's always the cp-logo-checksum. I have fetched the new template from the IAP VC multiple times and applied all changes but the mismatch always appears. 

 

2016-10-18_150220.png

 

I have also verified that the the:

 

  • captive_portal_cert_checksum
  • captive_portal_logo_checksum

variables are all correctly in the template.

 

Has anyone seen this before?

 

N

Aruba Employee
Posts: 125
Registered: ‎04-24-2013

Re: AirWave Template mismatch in Aruba Instant VC for cp-logo-checksum

Hi,

 

The captive logo config is controlled at group level and not per VC/AP level. Thus, we need to go to Group->Basic page to select the captive portal logo image that we want to use. The image needs to be
pre-uploaded to AMP in 'Device Setup'->'Upload Firmware & Files'->'Captive Portal Logo Files'. Also, please make sure the image is less than 16k.

 

Regards,

Vishnu

Regards,
Vishnu
If my post helped you, don't forget to give kudos ;)
Frequent Contributor I
Posts: 77
Registered: ‎12-07-2015

Re: AirWave Template mismatch in Aruba Instant VC for cp-logo-checksum

Finally getting back to this. This worked perfectly. Thank you.

Search Airheads
Showing results for 
Search instead for 
Did you mean: