08-09-2016 03:51 AM
We try to connect to an external NMS Aruba OS 126.96.36.199 version.
So, there is a need for a 6.4.x Guide MIB document.
And, according to AP Radio to calculate the Utilization (bps).
When you search me and know that under the Pooling with OID.
.188.8.131.52.4.1.148184.108.40.206.220.127.116.11.1.4 (TX byte)
.18.104.22.168.4.1.14822.214.171.124.126.96.36.199.1.6 (RX byte)
When Pooling at one-minute intervals, how do I convert it Bps?
Counter32 = Octet = byte
byte * 8 = bits?
Solved! Go to Solution.
08-09-2016 05:00 AM
Since ArubaOS 6.2, we have not been publishing a MIB guide. We instead have descriptions in the Mib. The good news is that the 6.1 Mib guide is pretty much the same thing. Please check for it here: https://support.arubanetworks.com/Documentation/ta
Let me check on how to convert the number received.
You can also obtain this number by using the command:
show ap debug system-status ap-name <name of ap> | begin "Interface Information"
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs