Network Management

Reply
Occasional Contributor II

Aruba OS v8 migration, testing

Greetings,

We are in the process of migratiting to v8 and would like to do some testing. Specifically, I would like to be able to point an exisiting AP 205 on OS 6.5 to the new environment. I have tried manually updating the server and master parameters on the AP but that does not seem to work. aruba-master is pointing to the exisiting 6.5 evironment so I don't want to use ADP. Any suggestions? Thanks!

Re: Aruba OS v8 migration, testing

That should actually work, can you share the commands you used ?

setenv master 

setenv serverip

save

boot

 

A few things:

- If that AP was previously provisioned to be used in your 6.5 environment make sure you use the same AP-Group name in AOS 8 that you had assigned on your 6.5 controllers.

- Confirm that you assigned the License under the folder you have your test controllers.

- CPSec is enabled by default so you can approve the AP manually or enable autoprovision 

 

 

Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Frequent Contributor I

Re: Aruba OS v8 migration, testing

I changed the DHCP scope option 43 to the new controllers. The AP came up with unknown group flag and then I re-provisioned it for the new group name.


#AirheadsMobile
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: