Network Management

Reply
Occasional Contributor II

Aruba instant and Airwave issue

Hi.. I’m using Aruba AirWave 7.7.12 for POC and trying to demo Aruba instant management via AirWave. I did all preliminary configurations on Aruba instant and the virtual controller is showing on AirWave. I add the new virtual controller into the AiWave and updated the role configuration. But still I could not see access points and users in the virtual cluster to demonstrate features to the customer… I’m using evaluation license generated by Aruba for demonstration.. Thanks
Frequent Contributor I

Re: Aruba instant and Airwave issue

Please check first in Release Notes that AMP 7.7.12 supports your Instant firmware. Rather recommend to upgrade to 8.0.x

HTH

Marek 

Marek Krauze, CWNE# 174, ACMX #295, ACDX #356
Something cool, helpful or interesting in my post - click the Kudos Star.
Helped to solve your problem - Click Accept as Solution
MVP

Re: Aruba instant and Airwave issue

According to the release notes for AMP 7.7.2, it is able to work with instant up to 6.2.1.0-3.4.0.0.

What model/firmware are you trying to demonstrate?

 

--Matthew

if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: