Network Management

Reply
Occasional Contributor II
Posts: 13
Registered: ‎02-28-2012

Can Airwave monitor and alert on the presence/absence of an ACL on a controller port?

Just wondering if Airwave can monitor a controller's config and generate an alert if an ACL is not applied to an interface.  I know that config monitoring exists, but there doesn't seem to be a readily apparent way to alert if, for instance, an ACL was removed from an interface.

Moderator
Posts: 1,270
Registered: ‎10-16-2008

Re: Can Airwave monitor and alert on the presence/absence of an ACL on a controller port?

If the ACL is present in the controller config, the config mismatch report should catch it.  But if you want like a trigger/alert, then you're going to want to file it as an RFE.


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Occasional Contributor II
Posts: 13
Registered: ‎02-28-2012

Re: Can Airwave monitor and alert on the presence/absence of an ACL on a controller port?

Thanks for your response.  I'll see about the feature request.

Search Airheads
Showing results for 
Search instead for 
Did you mean: