Network Management

Reply
Regular Contributor I
Posts: 187
Registered: ‎03-27-2013

Configure Airwave SNMP Trap for change of status of uplink interface of IAP

HI,

is possible to configure on the airwave an SNMP traps when opertstate of wired IAP's interface goes down?

 

In the monitor i see that one IAP ethernet interace have for admin statu  "UP" but the operation status is "Down".

operstat.jpg

Is possible to confure an SNMP traps / Alert for this event ?

Andrea
Guru Elite
Posts: 20,598
Registered: ‎03-29-2007

Re: Configure Airwave SNMP Trap for change of status of uplink interface of IAP

Is that AP online when this happens?  I am wondering what the true state of that AP is.  If the AP is not online, you can just set a trigger for the AP being down, otherwise, you will have to look at the trap received by Airwave and write a rule for it.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Regular Contributor I
Posts: 187
Registered: ‎03-27-2013

Re: Configure Airwave SNMP Trap for change of status of uplink interface of IAP

Hi,

yes the IAP is online but it works in bridge with other AP.

I need to know when the operational status change, how can i check it?

 

Regards

Andrea Acampa

Andrea
Search Airheads
Showing results for 
Search instead for 
Did you mean: