Network Management

Reply
Occasional Contributor II
Posts: 13
Registered: ‎07-31-2013

Guest users in Airwave in state pending.

I want to use these users for guest access with IAP

Aruba
Posts: 1,644
Registered: ‎04-13-2009

Re: Guest users in Airwave in state pending.

AirWave's guest user accounts are not supported on Instant.

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Moderator
Posts: 681
Registered: ‎04-16-2009

Re: Guest users in Airwave in state pending.

AirWave 7.7.5 will be out very soon and includes a new UI that mimicks the Instant WebUI.  You can configure users for the Guest DB on Instant there.  Not the same thing you are looking for but it is the next best thing :)

 

Here is a preview:

 

Awave775.jpg

Occasional Contributor I
Posts: 9
Registered: ‎04-16-2012

Re: Guest users in Airwave in state pending.

Is this feature slated for an upcoming release?  With Instant/AirWave deployments, having global guest management as well as self-expiring guest accounts is a must-have.

MVP
Posts: 1,413
Registered: ‎11-30-2011

Re: Guest users in Airwave in state pending.

if it is indeed part of 7.7.5 then it should be possible now, that version has been out for a while, did you check?

Occasional Contributor I
Posts: 9
Registered: ‎04-16-2012

Re: Guest users in Airwave in state pending.

I have tried 7.7.8/9 and it is possible to create guest users in the vitual controller GUI managment.  The problem is that it is site by site and is very limited for a Guest Administrator to be able to create accounts on the fly.   It would be great, since all the interface is already there, to be able to use the Guest Management in AirWave and have it replicate those guest accounts to all Virtual Controllers managed.

New Contributor
Posts: 1
Registered: ‎08-22-2014

Re: Guest users in Airwave in state pending.

Does anything changed wit this funcionality? I need to time limited ticked for my guest users connecting via IAP.

Regular Contributor I
Posts: 190
Registered: ‎04-27-2009

Re: Guest users in Airwave in state pending.

using 8.0.9 and same problem here , just wondered if it's possible to centralize creatitng guest users on groups or all VC's , but my test user is also having status "pending". 

 

perhaps cause i dont have controllers added to AMP , only VC/instants...

 

so lets do this via IGC per group based, i also would expect that "john doe" only needs to be added on one branch instead of all branches , <- useless if this is a normal guest which is never visiting those branches. 

 

well another use case would be if having users frequently visiting those branches and so branch1 and branch2 would sync regarding guest users.

 

thanks

ben

MVP
Posts: 1,413
Registered: ‎11-30-2011

Re: Guest users in Airwave in state pending.

all great ideas, put them in the idea portal and perhaps someday ... :)

Search Airheads
Showing results for 
Search instead for 
Did you mean: