Network Management

Reply
New Contributor

How to execute a command on Aruba Controllers via SNMP ?

I am looking to execute a comman on the WLAN controller, the objective is to run a command like the one below. SNMP v2 or v3

I am getting the MAC via 'wlsxTrapUserPhyAddress'

 

for example execute the below command "aaa user delete mac xx:xx:xx:xx:xx:xx"

 

Couldn't really find the MIB's or how to execute it ?

 

 

 

 

 

 

 

Guru Elite

Re: How to execute a command on Aruba Controllers via SNMP ?

There is no SNMP write function in ArubaOS.  You can execute "aaa user delete via XML-API"  in ArubaOS 6.x https://www.arubanetworks.com/techdocs/ArubaOS_64x_WebHelp/Web_Help_Index.htm#ArubaFrameStyles/XML_API/How_the__XML_API_Works.htm%3FTocPath%3DExternal%2520User%2520Management%7C_____2 or the rest api in ArubaOS 8.x and above.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
New Contributor

Re: How to execute a command on Aruba Controllers via SNMP ?

XML works like a charm ... thank you

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: